OD6: Overdrive 6-Speed Builder's Kit

This is the ORIGINAL 6-speed design that revolutionized the American V-Twin industry. It’s still the best overdrive 6-speed built to this day…hands down. Our OD6 is built to comfortably handle the power from today's big-inch motors. This transmission is rated for motors putting out up to 165ft/lbs of continuous use. It is available as a complete transmission with various case options and configurations, or as a builder’s kit for your stock case application, which requires little to no modification. Features Billet 6061-T6 bearing door 1/8″ thick bearing retainer plate Redundant Neutral smooth shift system Hard chrome plated shift forks Diamond cut gearset made out of 8620 steel All transmission seals, gaskets and hardware 5 year limited warranty Benefits Stronger than stock Lower RPM for smoother highway speeds Fuel efficiency Fitment 1990-92 FLT-FLH 1990-97 Softail 1990-94 FXR 1991-97 Dyna 1999 FXR 1998 Dyna 1998-99 Softail 1999-00 Dyna 2000-06 Softail 2001-05 Dyna 1993-97 FLT-FLH 1998 FLT-FLH 1999-00 FLT-FLH 2001 FLT-FLH 2002-06 FLT-FLH ** If you have the CVO Screamin' Eagle bike with the Factory Hydraulic side cover, please give us a call at 517-339-3835. Part Numbers OD6-401-02 OD6 Builder's Kit, 1990-1992 FLH-FLT, 1990-1994 FXR, 1990-1997 Softail, 1991-1997 Dyna, 2.94 1st Gear, Polished w/ Ear Door, Standard Shift Pattern OD6-401-02-N1 OD6 Builder's Kit, 1990-1992 FLH-FLT, 1990-1994 FXR, 1990-1997 Softail, 1991-1997 Dyna, 2.94 1st Gear, Polished w/ Ear Door, N1 Shift Pattern OD6-401-03 OD6 Builder's Kit, 1990-1992 FLH-FLT, 1990-1994 FXR, 1990-1997 Softail, 1991-1997 Dyna, 2.94 1st Gear, Black w/ Ear Door, Standard Shift Pattern OD6-401-03-N1 OD6 Builder's Kit, 1990-1992 FLH-FLT, 1990-1994 FXR, 1990-1997 Softail, 1991-1997 Dyna, 2.94 1st Gear, Black w/ Ear Door, N1 Shift Pattern OD6-401P-02 OD6 Builder's Kit, 2000-2006 Softail, 2001-2005 Dyna, 2.94 1st Gear, Polished w/ Ear Door, Standard Shift Pattern OD6-401P-02-N1 OD6 Builder's Kit, 2000-2006 Softail, 2001-2005 Dyna, 2.94 1st Gear, Polished w/ Ear Door, N1 Shift Pattern OD6-401P-03 OD6 Builder's Kit, 2000-2006 Softail, 2001-2005 Dyna, 2.94 1st Gear, Black w/ Ear Door, Standard Shift Pattern OD6-401P-03-N1 OD6 Builder's Kit, 2000-2006 Softail, 2001-2005 Dyna, 2.94 1st Gear, Black w/ Ear Door, N1 Shift Pattern OD6-401S-02 OD6 Builder's Kit, 1998-1999 Softail, 1998 Dyna, 1999-2000 FXR, 2.94 1st Gear, Polished w/ Ear Door, Standard Shift Pattern OD6-401S-02-N1 OD6 Builder's Kit, 1998-1999 Softail, 1998 Dyna, 1999-2000 FXR, 2.94 1st Gear, Polished w/ Ear Door, N1 Shift Pattern OD6-401S-03 OD6 Builder's Kit, 1998-1999 Softail, 1998 Dyna, 1999-2000 FXR, 2.94 1st Gear, Black w/ Ear Door, Standard Shift Pattern OD6-401S-03-N1 OD6 Builder's Kit, 1998-1999 Softail, 1998 Dyna, 1999-2000 FXR, 2.94 1st Gear, Black w/ Ear Door, N1 Shift Pattern OD6-401SP-02 OD6 Builder's Kit, 1999-2000 Dyna, 2.94 1st Gear, Polished w/ Ear Door, Standard Shift Pattern OD6-401SP-02-N1 OD6 Builder's Kit, 1999-2000 Dyna, 2.94 1st Gear, Polished w/ Ear Door, N1 Shift Pattern OD6-401SP-03 OD6 Builder's Kit, 1999-2000 Dyna, 2.94 1st Gear, Black w/ Ear Door, Standard Shift Pattern OD6-401SP-03-N1 OD6 Builder's Kit, 1999-2000 Dyna, 2.94 1st Gear, Black w/ Ear Door, N1 Shift Pattern OD6-402-02 OD6 Builder's Kit, 1993-1997 FLH-FLT, 2.94 1st Gear, Polished No Ear Door, Standard Shift Pattern OD6-402-02-N1 OD6 Builder's Kit, 1993-1997 FLH-FLT, 2.94 1st Gear, Polished No Ear Door, N1 Shift Pattern OD6-402-03 OD6 Builder's Kit, 1993-1997 FLH-FLT, 2.94 1st Gear, Black No Ear Door, Standard Shift Pattern OD6-402-03-N1 OD6 Builder's Kit, 1993-1997 FLH-FLT, 2.94 1st Gear, Black No Ear Door, N1 Shift Pattern OD6-404P-02 OD6 Builder's Kit, 2001 FLH-FLT, 2.94 1st Gear, Polished No Ear Door, Standard Shift Pattern OD6-404P-02-N1 OD6 Builder's Kit, 2001 FLH-FLT, 2.94 1st Gear, Polished No Ear Door, N1 Shift Pattern OD6-404P-03 OD6 Builder's Kit, 2001 FLH-FLT, 2.94 1st Gear, Black No Ear Door, Standard Shift Pattern OD6-404P-03-N1 OD6 Builder's Kit, 2001 FLH-FLT, 2.94 1st Gear, Black No Ear Door, N1 Shift Pattern OD6-404P2-02 OD6 Builder's Kit, 2002-2006 FLH-FLT, 2.94 1st Gear, Polished No Ear Door, Standard Shift Pattern OD6-404P2-02-N1 OD6 Builder's Kit, 2002-2006 FLH-FLT, 2.94 1st Gear, Polished No Ear Door, N1 Shift Pattern OD6-404P2-03 OD6 Builder's Kit, 2002-2006 FLH-FLT, 2.94 1st Gear, Black No Ear Door, Standard Shift Pattern OD6-404P2-03-N1 OD6 Builder's Kit, 2002-2006 FLH-FLT, 2.94 1st Gear, Black No Ear Door, N1 Shift Pattern OD6-404SP-02 OD6 Builder's Kit, 1998-2000 FLH-FLT, 2.94 1st Gear, Polished No Ear Door, Standard Shift Pattern OD6-404SP-02-N1 OD6 Builder's Kit, 1998-2000 FLH-FLT, 2.94 1st Gear, Polished No Ear Door, N1 Shift Pattern OD6-404SP-03 OD6 Builder's Kit, 1998-2000 FLH-FLT, 2.94 1st Gear, Black No Ear Door, Standard Shift Pattern OD6-404SP-03-N1 OD6 Builder's Kit, 1998-2000 FLH-FLT, 2.94 1st Gear, Black No Ear Door, N1 Shift Pattern Detail Bearing DoorOD6 bearing doors are a 1/2″ wider at the mounting flange then a stock 5-Speed door due to the 6th gear. The OD6 door comes with or without an ear. The ear door is for exhaust bracket mounting and does not fit 1993-2006 FL applications. Note the images below. The OD6 door bearings are larger providing 25% more dynamic load capacity than stock bearings used through 1998, also uses a 1/8″ bearing retainer plate instead of stock style snap rings. The FLT® style exhaust bracket that bolts to the lower part of the side door using the four 5/16 screw holes in the case may have to be modified. Since the surface in which this bracket mounts to is .525” thicker than stock, experience shows that .525” should be laterally taken out of the exhaust bracket to keep the exhaust pipe in the O.E.M. position. OD6 Ear & No Ear Bearing Door OD6 Bearing Door vs. Stock Thickness Comparison Redundant Neutral System Shift SystemOur 6 Speed shift system with roller detent guarantees smooth shifts every time and our redundant neutral ensures that finding neutral is a easy chore. We mount a plunger detent on the left side pillow block and cut a plunger track into the shift drum itself. The plunger follows this track during operation (shifting) and when shifting into neutral pops into a pocket. This system lets you feel that you’re shifting into neutral. No more guessing. Shift drum features more aggressive timing on the fork groove profiles and is case hardened to 58 Rockwell for wear resistance and crisp shifts. We built our reputation on smooth shifting 6-speed transmissions; our drum designs benefit from the engineering lessons learned. GearsetAll OD6 gearsets are made out of 8620 steel, gears are cut before heat treat then precision ground with diamond coated tooling after heat treat (58-62 Rockwell ‘C’). This extra steps ensures not only a quieter gear pair, but enables much tighter backlash control. This tighter control on the gears yield a silent operation. RatiosThe OD6 comes in a standard 2.94 configuration. A way to physically tell which ratio you have is pretty common knowledge here at BAKER, but if you would like to know look at the 1st gear pair on the gearset. Our standard 2.94 1st gear will not have a notch on the 1st countershaft gear. Use the image on the far right for reference. This is very important to know if you need any replacement parts or components. OD6 Gearset Layout The OD6 Ratios Gear Ratios 1st Gear 2.94 2nd Gear 2.21 3rd Gear 1.60 4th Gear 1.23 5th Gear 1.00 6th Gear .86 OD6 Shift Forks Shift ForksOur billet steel forks are dipped in a hard chrome plate bath for wear resistance, also designed with oil reliefs to ensure proper lubrication and wear resistance on fork blades and shift dogs. Available No Cost Options Standard Shift Drum (1-N-2-3-4-5-6) N1 Shift Drum (N-1-2-3-4-5-6) Reverse Pattern Shift Drum (6-5-4-3-2-N-1) Speedo Recalibration Unit Special Note Speedo recalibration unit is required for electronic speed sensor applications; PN 95E-56B. Compare the OD6See the difference between other transmission kits and our OD6. Click Here for a PDF file comparing our DD6 and OD6 gearset against other manufacturers. Click on the image to Compare the OD6 and DD6 gearsets OD6 vs. DD6 Recommended Fluid / Level Picking the right transmission fluid ensures the life and durability of your transmission, that’s why BAKER recommends a fully synthetic GL-5 rated gear weight oil of 75W-140. If a GL-5 rated gear lube is not available, these commonly carried viscosities (weights) will work 75W-90, 75W-140 and 85W-140. BAKER does not recommend the use of Syn3 (20W-50). For Bert’s article on ‘Oil & Spiders’ Click Here BAKER OD6 Fluid Capacity Dry: 22-24fl-oz BAKER OD6 Fluid Capacity Wet: 18-22fl-oz Learn more about Spectro Performance Oils here: https://spectro-oils.com Installation Instructions OD6 installation instructions with exploded views:Click Here Installation Note: We started providing install DVD’s with every builder’s kit starting in October 2012. At approximately 3:25 of the OD6 portion of the DVD, Bert talks about modifying the shifter pawl. This modification is related to the stock shifter pawl lever assembly (H-D PN 34972-02B) and the use of BAKER 5-6QSN & 5-6QLN shift drums. We now provide a shift drum BAKER PN 124-0D6, which supercedes the 5-6QSN, 5-6QLN Shift, 5-6QEN, 5-6QFN & 5-6QGN shift drums, that requires no shimming and works with BAKER shifter pawl 555-56C or 555-56LD (depending on year or motorcycle) which we include in kits and on all BAKER complete builder’s kits. We do not sell any kits, shift drums or transmissions that require any shifter pawl with BAKER marked on it, that needs to be ground or modified anyway. Any questions, please call us at 517-339-3835. 1st Gear Design Change 1st Gear Change Addendum-March 2012: Click Here