Evercoat Light Speed Optex Premium Lightweight Filler, 100390

Product Overview: Evercoat Light Speed® Optex® Premium Lightweight Filler (100390) is an elite, dual cure autobody filler delivering unparalleled sanding qualities through Evercoat’s patented EcoResin™ technology. Its cure time can be accelerated to just 3–4 minutes with a UV lamp, dramatically improving repair efficiency. The non-sag formula offers excellent filling properties while eliminating the need for finishing putty and featuring Optex® color changing technology from pink to a light gray-green for precise application timing. Part of the Metalworks® system. Available in 1 gallon size container containing 0.8 gallons (3L) of product, hardener included. Features and Benefits: OPTEX® color changing technology for precise application timing Unique dual-cure system 3min ultra-fast UV cure time (with lamp/20min without) Industry leading sanding & clog-free formula Industry's best spreading & ultra smooth finish Virtually eliminates pinholes 500+ Hours Corrosion Resistance (ASTM B117) Industry-leading adhesion to majority of substrates including OEM paint Video: Recommended Substrates: Approved substrates: Steel Stainless Steel Galvanized Steel Aluminum SMC Silicon Bronze Welds Fiberglass Sanded OEM Paints NOTE: For structural repairs prone to high degrees of stress and flexibility, use a fiber reinforced filler such as Evercoat® Everglass®, Kitty Hair® or Fiber Tech® Mixing: Stir the filler before using. Knead the cream hardener Measure hardener 2% by weight (add a ribbon of cream hardener from edge to edge across the center of a 4” diameter puddle) Puddles larger than 4” (10 cm) in diameter will require additional hardener Mix thoroughly until a uniform color is achieved Approximate setting time is 5-6 minutes @ 72°F (22°C) Tech Specs: Appearance: Pink paste VOC: Refer to Section 9 of the Safety Data Sheet Relative Density: Refer to Section 9 of the Safety Data Sheet Working Time: 5-6 minutes Sand Time: 30 - 40 minutes without UV/LED Cure 3 - 4 minutes with UV/LED Cure Note: Allow minimum of 45 minutes sanding time over silicon bronze welds if not cured with UV Curing Light Max. Recommended Thickness (sanded): 1/4 inch (6mm) Note: Properties are typical values and should not be considered as sales specifications. Physical testing performed @ ~72°F (22°C) / 75% RH unless otherwise noted Tech Data Sheet: Click here SDS: Click here Safety: Read all directions and warnings prior to using Evercoat® products. Safety Data Sheets can be found online at www.evercoat.com Never return mixed filler to can. Keep the can closed and store in a cool dry place. Use with Evercoat® Cream Hardener Only! Click here for Safety Data Sheet ** This item is considered a Hazardous Materials (HAZMAT) and must be handled in accordance with all applicable federal, state, and international regulations. Item ships UPS Ground ONLY**