Junior™ Ultramount 7-1/2" Press Riser

The Junior Ultramount Press Riser has the same beefy 3/16" thick steel construction as the standard Ultramount, however, the Junior is only 7-1/2" tall instead of 9-3/4". This is a dedicated mount, meaning you select it for the press you have and your press bolt directly to it. If you want quick change style, they are right (Here) Footprint of the mount is 10-1/2" wide by 9" deep. (Note) With the Junior Ultramount only being 7-1/2" tall, most press linkages will hang below the benchtop to impede opening the cabinet doors or drawers (if you have them) below your bench. If you have any doubt before placing an order, measure the linkages hanging down below your bench top and subtract 7-1/2". If you want to have the press completely on top of the bench, the standard 9-3/4" tall Ultramount will fix you up perfectly. Attention: Please choose your particular press application from the drop down box above. Note: If you do not see your press listed here, it is most likely available in quick change style right (Here) Swap out your presses in 30 seconds. Downloadable 7-1/2" Junior Ultramount footprint PDF (Here) Hardware to bench info: (You will need 4pcs of 5/16" diameter hardware of whatever style you need to attach the mount to your bench. I would include it, but everyone's benches are different and require different hardware.) However, for simplicity, here are 2 premade bolt kit options for most benches up to 1 1/2" thick. Have a look (Here) for the standard bolt through style kit: And (Here) for the Barbed T-Nut style kit: