Toyota Tacoma Custom Height XTR1 Bed Rack

The XTR1 Custom Height Bed Rack is the original Xtrusion Overland four-upright aluminum extrusion rack for the Toyota Tacoma. Built with one upright at each corner, the XTR1 gives Toyota Tacoma owners a strong, modular, open-sided rack system for overland travel, work use, daily hauling, and weekend gear. Unlike fixed sheet-metal racks, the XTR1 is built from T-slot aluminum extrusion so your setup can change as your truck build evolves. Mount rooftop tent accessories, recovery boards, awnings, water storage, fuel cans, bikes, kayaks, ladders, conduit, lumber, and jobsite gear without locking your truck into one permanent layout. Built to mount securely to the Toyota Tacoma bed rails. What it does Bolts directly to your Toyota Tacoma’s factory bed rails using the included bedrail brackets. It turns your bed into a fully modular cargo platform: carry a rooftop tent, awning, recovery gear, fuel, and water on top, while keeping the bed underneath free for daily use. Works as a Toyota Tacoma ladder rack, a cargo rack for lumber and conduit, or a no-nonsense overland basecamp — built from solid T-slot aluminum, not flimsy sheet metal. Built for the Toyota Tacoma The XTR1 Custom Height is engineered to bolt directly to the Toyota Tacoma’s factory bed rails. The uprights are pre-cut and pre-drilled for a clean, flush mount. It’s not a universal bracket forced to fit — it’s purpose-built for the geometry and rail spacing of the Tacoma. Why XTR1 is different The XTR1 is our original four-upright bed rack and the foundation that established the Xtrusion Overland rack system. Its open design provides excellent side access, outstanding accessory compatibility, and a clean layout that’s equally at home on work trucks, overland builds, and daily drivers. It comes with 4 uprights (one in each corner), 2 side braces, 2 top crossbars, and 2 top support braces. Fewer moving parts, lighter weight, and a clean, traditional look that ages well under trail dust and jobsite grime. Solid extruded aluminum — the strongest, lightest, most modular material on the market, with no rust and no sacrifice in features. T-slot on every linear surface — near-infinite mounting points; mount anything in any position and reconfigure in minutes. 4 uprights (one in each corner) — classic, proven load distribution for tents, awnings, recovery gear, and commercial gear. Simple, bolt-on mounting — no center columns, no complex adjustability. Just a solid rack that bolts to your bed rails and stays there. Choose XTR1 if you... Want more than just a rack. It is the starting point for a modular truck system. Start with the bed rack, then add accessories as your needs change. Depending on your setup, the XTR1 can work with MOLLE panels, AXS Gates, slide-out storage, recovery gear mounts, lighting, water storage, and other rack-mounted accessories. Because the rack is built around T-slot extrusion, you can continue adapting the layout instead of replacing the entire system as your build grows. What’s included 2 Top Crossbars 4 Uprights (Columns) 2 Top Support Braces (1530 Black) 2 Side Braces (1530 Black) 4 Bedrail Brackets (connect uprights to your Toyota Tacoma bed rails) 4 Top Corner Brackets (connect crossbars and uprights) All screws and hardware required for assembly Set of Black XTR Off-Road Reinforcement Plates ($110 value) Metal Handle Kit — Set of 4 ($40 value) 16 pcs Drop-In T-Nuts — 5/16-8 ($12 value) 16 pcs Button Head Screws — 5/16-8 x 5/8" ($8.80 value) Accessory Stages — outfit your bed rack now and save big Stage 1: Bed Rack only Stage 2: Bed Rack + 8 MOLLE Plates (12x9 plates for mid-height racks & 16x11 plates for cab-height racks) Specifications Rated capacity (evenly distributed): 400 lb dynamic off-road, 850 lb dynamic on-road, 1,500 lb static — or OEM bed rail capacity, whichever is less. Looking for something a little different? We build XTR1 and XTR3 racks for every Toyota Tacoma setup — pick the one for your bed: XTR1 Pre-configured Height Bed Rack: Toyota Tacoma XTR1 Pre-configured Bed Rack XTR1 Bed Rack for Retrax XR Tonneau Covers: Toyota Tacoma XTR1 Retrax XR Build XTR1 Bed Rack for Softopper, FasTop & Bestop Soft Toppers: Toyota Tacoma XTR1 Soft Topper Bed Rack XTR3 Bed Rack for Retrax XR Tonneau Covers: Toyota Tacoma XTR3 Retrax XR Build XTR3 Bed Rack for Softopper, FasTop & Bestop Soft Toppers: Toyota Tacoma XTR3 Soft Topper Bed Rack Roll-n-Lock XT, Pace Edwards UltraGroove, or another built-in T-slot cover? Email support@xtrusiondesigns.com and our team will configure the right fit. Explore more Toyota Tacoma gear See every Toyota Tacoma rack option on our Toyota Tacoma Bed Racks collection. Need a cover too? Browse our Toyota Tacoma Bed Covers & Soft Toppers collection. Frequently Asked Questions What is the difference between the Pre-configured and Custom Height? The Custom Height is designed to bolt directly to your bed rails as a standalone rack foundation. The XTR1 Pre-configured comes with mid-height and cab-height options and offers ready-to-go accessory packages (MOLLE, AXS Gates, Slide Outs) built specifically for those heights. Does this require drilling into my Tacoma? No. The rack mounts directly to the factory bed rails using the included bedrail brackets. No permanent modifications, no drilling, and no compromising your factory finish. Will this rack work with a Softopper, FasTop, or Bestop on my Tacoma? No. The XTR1 Pre-configured is designed to bolt to your bed rails, not a topper cover. If you run a canvas-style soft topper, look at our XTR1 Soft Topper Bed Rack or XTR3 Soft Topper Bed Rack instead, both of which are built at a 13.3° angle to match your topper’s sidewalls. *See Terms and Conditions for additional product disclaimers.