Tokyo Marui MWS / DE Noveske HPA Adapter (MODULAR) - PLUG AND PLAY

This adapter allows you to run HPA on your MWS / MWS clone Comes pre-fitted with valve, feed lips and gas router - you do not need to use any donor parts. No assembly is required. We test each adapter in a Tokyo Marui MWS before shipping. This is also compatible with the Salvo Precision MCX Virtus. If you are purchasing this for a NOVESKE GHETTO BLASTER, you need this SPACER which fits between the modular top, and the adapters magwell, allowing fitment in the Ghetto Blaster (as it has a large flared magwell). If purchased with an adapter we will install this for you. If you have a CYMA/EMG CGS, you will need our specific CYMA/EMG CGS adapter. The gas router for this adapter is made from injection moulded rubber, to the standard MWS spec and dimensions, meaning you can use a factory or aftermarket MWS router should you wish. TM MWS feed lips are also compatible with this adapter. We utilise a very high flow valve. This has allowed us to build a far more reliable adapter that is capable of high FPS and sustained full auto. A rear shim is included, which can be fitted to increase air seal (due to manufacturing tolerances between various brands of 'MWS' receiver) Includes 4x Longer Screws and 4x Nuts Includes rear shim, one set of spare feed lips, a longer valve knocker for certain non TM MWS clones,  and all screws required to fit any of our modular magwell bases. US Style HPA Fitting as Standard (most common fitting across industry - compatible with all AIRTAC HPA equipment) *Drum mag not included with drum base. You can purchase drum here. DO NOT EXCEED 150PSI WITH ANY AIRSOFT HPA ADAPTER. ALWAYS USE AIR REGULATED BY A SECONDARY REGULATOR (EG AT200, WOLVERINE STORM, POLARSTAR MRS). CHECK YOUR PSI BEFORE CONNECTING AIR TO A HPA ADAPTER. NEVER CONNECT OUR EQUIPMENT TO PAINTBALL AIR TANKS OR CO2 TANKS.NEVER CONNECT OUR EQUIPMENT TO A TIPPMAN STYLE HPA LINE