500 x 0.001 g Precision Balance - 1 mg Digital Analytcial Lab Scale

Responsive Page with Multiple Modules Introduction The USS-DBS64-5 precision balance, with a capacity of up to 500g and a readability of 0.001g, is ideal for applications requiring a moderate level of precision. The strain gauge weighing sensor ensures reliable results, while the backlit LCD display provides clear readings. It is well-suited for tasks like chemical experiments, pharmaceutical formulations, and food processing where a degree of precision is required, but it may not be the best choice for highly specialized applications demanding the highest accuracy. Applications Features Readability: 0.001g with strain gauge Capacity: 0.01g-500g Stabilization Time: ≤3 seconds External Calibration: Manual calibration with weights 10 Weighing Units Conversion: g, ct, oz, ozt, lb, TOL, dwt, MM, kg and % Both AC/ DC power supply: AC 100V-240V power or 9V battery(battery not included) Built-in Applications: parts counting, percentage function, tare function, fault display and etc. More Details User Manual To learn how to install, calibrate, set up, and use this product, please refer to the user manual. Packing List ① Balance Main Body ② Power Cable ③ Weighing Pan ④ Instruction Manual ⑤ Calibration Weight (200g) *To view the full table on mobile, please swipe left or right on the screen. Technical Data Model USS-DBS64-5 Working Temperature 41℉ - 104℉ Weighing Sensor Strain gauge Stabilization Time ≤3s Calibration External calibration Calibration Weight 200g*1 Capacity 0.01g-500g Units g, ct, oz, ozt, lb, TOL, dwt, MM, kg and % Readability 0.001g Interface No Repeatability ±0.002g Power AC 100V-240V/9V battery(not included) Linearity ±0.005g Packaging Dimensions 11.61"x9.45"x5.31" Pan Size Φ90 mm Gross Weight 4.52 lbs Number of Displays 1 Windshield Yes *To view the full table on mobile, please swipe left or right on the screen. Ce Certified Quality & Safety Precautions Leveling the Balance: Accurate horizontal positioning necessary for repeatable measurementsand exact results. Adjust the leveling feet of the analytical balance until the air bubbleinthe indicator is centered. Warm-Up Requirement: For accurate results, the balance must warm up for at least 30 minutes after being powered on or after a power outage longer than 30 minutes, to reach the proper operating temperature before calibration or use.(For warm-up time details, refer to the user manual or contact support.) Stability: Place the balance on a stable, vibration-free surface, away from drafts and electromagnetic interference. It's important to note that high-precision balances are more susceptible to environmental factors, which can affect reading stability. Calibration: Calibrate the balance if it is moved (even within the same room), when ambient conditions change, and before each use. If pressing the "CAL" button has no effect, ensure you are pressing and holding it. For most models, calibration requires a long press rather than a quick tap.(Refer to the manual for specific instructions). Troubleshooting Problem Cause Solution Display not working No power supply Plug in the adapter Display shows "" Object weight below minimum threshold, taring issues exist, or balance is not properly calibrated. Make sure item being weighed is at least 10mg. Make sure receptacles have been tared, and the balance has been properly calibrated. Display shows "" ltem being weighed is over maximum allowable weight. Make sure balance is properly calibrated, and make sure item is below maximum allowable weight. Display shows "Err-1" Power issues with the balance. Machine may have a poor power connection. Check the power in the back, and the outlet. Leave machine off for several minutes, unplug fully, then reconnect and beqin again. Display shows "Err-2" Unstable weighing conditions. Recalibrate machine make sure balance is level, and make sure item being weighed is fully stable. All Options Units Readability Model Capacity Calibration Weight Linearity Repeatability Pan Size Wind Shield Calibration Stabilization Time Power Supply g, ct, oz,ozt, lb, TOL,dwt, MM, kg,% 0.001g USS-DBS64-5 0.01g-500g 200g*1 ±0.005g ±0.002g Φ90mm yes external calibration ≤3s AC/DC 0.01g USS-DBS59-5 0.1g-500g 200g*1 ±0.03g ±0.02g 150x180mm no USS-DBS59-10 0.1g-1kg 500g*1 USS-DBS59-20 0.1g-2kg USS-DBS59-30 0.1g-3kg USS-DBS59-50 0.1g-5kg no 0.1g USS-DBS60-50 1g-5kg no ±0.3g ±0.2g USS-DBS60-100 1g-10kg USS-DBS60-150 1g-15kg