Osmo Polyx Oil Samples | 5ml

Please note samples are sold individually and require 1 coats to get the proper sheen level/finish. Each 5ml satchel will cover about an A4 sheet of paper in size, Durable, low maintenance, oil and wax finish for interior timber. The combination of natural oils and waxes penetrate deeply into the surface of the timber creating a finish as durable as polyurethane, and far easier to repair and rejuvenate. The mircroporous nature of Osmo's Polyx®-Oil allows timber to breath so that finish will not crack, peel or blister. Advantages: Easy to apply, with 1 thin coat Based on natural oils and waxes Enhances the woods natural character Very durable and hard wearing Food safe when dry Extremely stain resistant Resistant to wine, cola, tea, coffee, water and fruit juices Microporous breathable finish which does not crack, peel or flake Spot repairs are easy. No need to sand the whole floor, or piece of furniture Easy to maintain with Osmo's Wash & Care, Liquid Wax Cleaner and Maintenance Oil Suitable for children's toys, cots and bassinets Product Details: Coverage: Approximately 30 square metres per litre with one coat No of coats: 1 thin coat Application: Floor brush, flat brush, short nap microfibre roller (6mm nap for 10cm rollers or 8mm nap for 25cm rollers), and fleece applicator pad. Drying time: 8 - 10 hours Sizes: 5ml (sample satchel), 375mL, 750mL, 2.5 litres and 10 litres Sanding in between coats not necessary Finishes: Satin 3032, Semi Matt (Low Sheen) 3065, Matt 3062 and Gloss 3011 Storage times: 5 years unopened, 1 year once opened Additional Advice: Osmo's Polyx®-Oil is suitable for a variety of timber types - both hardwood and softwood - such as Pine, Kauri, Oak, Eucalyptus, Teak, Jarrah and Douglas Fir (Oregon). For timbers which are oily by nature, such as some species of Eucalypt, Kwila/Merbau and Rosewood etc, it is recommended that the timber's surface be wiped over with a solvent to remove any oil present, before applying Polyx Oil. A suitable solvent would be Osmo's Brush Cleaner and Thinner. The preferred method of application is by good quality bristle brush. Osmo's floor brush applicators are ideal. A low nap microfibre roller may also be used. Please read the data sheet for details. Liquid Wax Cleaner is recommended for buffing and rejuvenating the timber when needed. A trial is always recommended first to determine suitability. To view further information on this product, please click on the Resource pages below. Can Sizes / Coverage 375ml – 11 square metres one coat 750ml - 22 square metres one coat. 2.5L – 75 square metres one coat 10L – 300 square metres one coat VIEW PRODUCT INFORMATION/COLOUR SHEET HERE