Drolet Eco-55 Pellet Stove With 4" Basement Venting Kit DP00070KVB

Drolet Eco-55 Pellet Stove With 4" Basement Venting Kit DP00070KVB Product Description Easy to use and maintain, the Eco-55 pellet stove is ideal for heating spaces up to 2,000 ft². It features intuitive electronic control and easy to use thermostatic control. Cleaning is a breeze, with access to components that are removable without tools. Certified at only 0.96 g/h, the Eco-55 produces up to 39,260 BTU/h, and provides clean and efficient heating. Included: 4'' Vortex pellet vent basement kit (one stove adapter, one 3"Ø to 4"Ø increaser stove adapter, two tees with cap, four pipe lengths: 12", 18", 24" and 36", one slip (adjustable section) - 9"L, two 90° elbows, one wall pass-thru, two wall supports and one jet cap), blower, ceramic glass, ash lip Burn time up to 51 hours (up to 120 hours with the optional hopper extension) Hopper capacity of 60 lb Top-feed burner EPA 2020 certified Proudly made in Canada Limited lifetime warranty Certified for mobile home and alcove installation Weight : 319 lbs Specifications Fuel type (12) Pellet (Premium grade or better) Recommended heating area (10) 500 - 2,000 ft² Hopper capacity 60 lb (27 kg) Maximum burn time (10) 51 h Maximum heat input rate (4) 39,260 BTU/h (11.5 kW) Minimum overall heat output rate (5) 6,648 BTU/h (1.95 kW) Maximum overall heat output rate (5) 28,540 BTU/h (8.36 kW) Minimum average overall efficiency (HHV) (6) (8) 70.3 % Maximum average overall efficiency (LHV) (6) (7) 75.8 % Optimum efficiency (2) 78.4% Optimum heat transfer efficiency (9) 73 % Burn rate 1.2 - 4.7 lb/h Average particulate emission rate (3) 0.96 g/h Average CO (11) 7.6 g/h Average electrical power consumption for ignition cycle (1) 3.02A (360 W) Average electrical power consumption for continuous operation (1) 1.3 - 2.5A (51 - 140 W) Size Medium Alcove installation approved Yes Mobile home approved Yes, with fresh air intake High-efficiency certified appliance Yes, EPA 2020 approved Combustion technology Top-feed Baffle type Stainless steel Flue outlet diameter 3" Chimney diameter 3" | 4" Type of chimney ULC/ORD-C441, CAN/ULC S609, UL 641 (TYPE L) Overall dimension (Width) 25 1/4" Overall dimension (Height) 32 5/8" Overall dimension (Depth) 29 1/2" Premium quality blower included (CFM) 176 CFM included Voltage and frequency 120 VAC / 60 Hz Noise level at 6 feet 47 dBa (+/- 3 dBa) - 60 dBa (+/- 3 dBa) Door type Single, glass with cast iron frame Glass type Ceramic glass Glass surface - W x H 15 3/4" x 8 1/8" Canadian Standard (emissions) CSA B415.1-10 USA Standard (emissions) EPA, ASTM E2779 Canadian Standard (safety) ULC S627 USA Standard (safety) UL 1482, ASTM E1509 Certified according to applicable standards By an accredited laboratory (CAN/USA) Warranty Limited lifetime Shipping weight 277 lb (126 kg) Clearance To Combustibles Country Canada United States Clearance - Back wall 3" 3" Clearance - Side wall 6" 6" Clearance - Corner 3" 3" Clearance - Base of the unit to ceiling** 48" 48" The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual. Unless stated otherwise, measures were taken directly at the main power source and include all electrical components present in the appliance. Optimum overall efficiency at a specific burn rate (LHV). This appliance is officially tested and certified by an independent agency. Based on the maximum burn-rate and a dry energy value of pellet at 8,600 BTU/lb. As measured per CSA B415.1-10 stack loss method. Efficiency based on radiated and delivered heat when allowing cycling from high to low burn to simulate thermostat demand. Lower Heating Value of the fuel. Higher Heating Value of the fuel. The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the solid fuels into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion. Recommended heating area and maximum burn time may vary subject to location in home, chimney draft, heat loss factors, climate, fuel type, feed rate, fuel level, and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature considering that the space configuration and the presence of heat distribution systems have a significant impact in making heat circulation optimum. Grades of pellet fuel are determined by organizations such as Pellet Fuels Institute (PFI), ENplus and CANplus. Product Documents Installation Manual Operation Manual