EQUISOL - Pro E365 - Fast Drying Decking Oil

EQUISOL - Pro E365 - Fast Drying Decking Oil EQUISOL PRO E365 Enhance the beauty of your timber deck with Pro E365, a premium penetrating timber oil by Equisol, available at Decking Perth. Unlike traditional coatings, Pro E365 is a clear exterior oil that enriches the natural grain of your timber, providing a stunning matt finish. Pro E365 deeply penetrates and diffuses into the timber, offering long-lasting protection from warping and splitting. Formulated with an environmentally-friendly linseed oil base, this oil is infused with mould and algae inhibitors, ensuring your deck remains free from black mould while preserving its integrity. Additionally, Pro E365 features enhanced UV absorbers, protecting your deck from the damaging effects of sunlight. Choose the clear oil to allow your timber to naturally silver over time, or add an Equisol Colour Tone for a rich, long-lasting colour. Trust Pro E365 to nourish, protect, and enhance the beauty of your deck. CLEAN UP: Water SIZES AVAILABLE: 1L, 5L, 10L COVERAGE: Softwood: 6-10m2 per litre. Hardwood: 10-16m2 per litre. COLOUR TONES AVAILABLE: Black, Grey, Dark Brown, Medium Brown, Pale Brown and Red Brown. PROTECTS AGAINST FEATURES Easy single pack application Easy to use and maintain 2 coat system Penetrating timber oil stabilises timber moisture content and allows water to escape instead of sealing it in under film Water repellent to keep timber dry from the inside out. Non film-forming Dirt Resistant Scratch resistant and easily repaired No cracking, peeling or blistering Enhanced UV absorbers Formulated for harsh Australian sub-tropical climate Matt finish enhances natural timber grain and beauty Protects against effects of moisture, sunlight and mould Nourishes timber to minimise cupping, warping and splitting Includes powerful mouldicide and algicide Effective in sealing pressure treated timbers Can be applied on fresh timber without weathering Can be applied to seasoned or unseasoned timber Recommended for pre-finishing/pre-oiling before installation Can be wet stacked for easy pre-oiling No oily residues weeks after coating in cold wet climates May be applied to either rough sawn or dressed timber 2 coats are all that needed Range of 6 architectural colour tones can be mixed in, or leave as clear to allow timber to silver naturally No sanding in-between coats Can be recoated once touch dry (for best result, leave for 24 hours if possible) Can be applied in direct sun and cold weather Clear coat is clear without green staining No wet edge Easy maintenance – can be recoated without harsh sanding CHOOSE YOUR TONE Colour Tones are available to mix with Equisol to maintain the natural timber colour character, delay silvering, and retain the "freshly oiled look" for longer. If you wish to retain the natural timber colour, use Equisol without a Colour Tone.