FMS 1400mm Piper J-3 Cub V4 PNP w/Floats&Reflex V2

Introduction OverviewThe J3-Cub was first introduced in the 1930’s as an affordable trainer for the masses. Its success was cast in stone with the threat of WW2 and the Civilian Pilot Training Programme this resulted in the Cub being used to initially train over 80% of all American military pilots. FMS have created a super detailed version of this aircraft and reduced assembly time. Giving you more time to enjoy the great flying characteristics of this 1400mmm span Cub. There is plenty of thought gone into this aircraft and it shows with a high part count and scale detailing. RTF (Ready to fly): A RTF plane includes the plane with the radio, receiver, battery, charger, motor, servos, retracts (if it has) and ESC already in place. PNP (Plug and Play) - A PNP foam plane includes the plane with the motor, servos, retracts (if it has) and ESC already in place. Battery and charger are not included. Radio and receiver are not included. KIT: A KIT plane is an airframe only. It does not include any motor, ESC, or servos (though usually includes servoless retracts on planes with retracts). Specification Wingspan 1,400mm/55.1in Overall length 900mm/31.7in Flying weight Around 1,340g Motor size Brushless 3536-KV850 ESC 40A Servo 9g Servo x 4 Radio 4 Channel CG (center of gravity) 55-60mm (From Leading Edge) Prop Size 11*7 Recommended battery Li-Po 11.1V 2200mAh 25C Aileron Yes Elevator Yes Rudder Yes Flaps No Retracts No Approx. flying duration 6min Minimum age recommendation 14+ Experience level Beginner Assembly time 30 minutes